I already ordered 1kg hyper pla white from creality ($8). What else I can buy during black Friday? I’m not sure what I’ll be printing other than trinkets and household items. These are the ones I currently have in my cart. Please let me know your thoughts and advice.
White petg 1kg from creality $6
Anycubic: petg texture gray, pla+ black, Pla strawberry pink - $26
Please let me know if I should get something else instead.
Creality and Anycubic are fine. If you’re looking for a general low-cost manufacturer try “TINMORRY” if they’re available in your region, I’ve good experiences with those.
For really high quality take a look at extrudr.
Do yourself a favour though, don’t buy bulks of filament from those cheap AliExpress brands (like Tecbears, Geeetech and such). They’re cheap and really bad.
Eryone and Jayo are pretty good (and cheap) too. I didn’t have issues with Tecbears PLA I got from Amazon
Those are fine picks.
Grab some big ziplock bags and a pack of desiccant sachets to keep the filaments dry while in storage.
Addendum: If nozzles are cheap, you could pick some up. They are consumable parts.
And you could grab a tighter nozzle too, for better details in your prints. (Though the print time goes up dramatically!)
or just buy a proper nozzle with a tungsten or ruby tip.
How frequently would I need to replace a nozzle?
Not often, if you’re running non-fiber reinforced filaments. even standard brass nozzles can get 1000 hours on them before you start to get loss of print quality. And hardened nozzles have practically infinite life in normal plastic.
Better off getting multiple sizes though. A default 0.4mm nozzle is a nice middle ground. 0.2mm gains a ton of detail for small parts. 0.6 and 0.8mm nozzles can drasticall ly reduce print times for large parts and creates better overhang/bridge surfaces.
All true, but sometimes a clog turns into a Clog and it’s time to just drop in a replacement while you try and fix the clogged one.
Got it, thank you
Dual color silk filaments are fun. The print looks a different color depending on the angle.
A filament dryer.
This.
Avoid ABS. Stinky and weak.
Yes, choose ASA. Less stinky and UV resistant.
Yup, try PETG, it’s pretty versatile and resistant to most things (aside from very high temperatures).
And releases toxic gases
Printed Solid Jessie filament has become most of my stash, its mid-priced filament that prints like premium. I use PLA for most stuff and PETG if its going to get sun or if PLA would be too brittle. I also use some flexibles (TPU) but each printer is different in how it handles soft filaments, so its hard to recommend.
If you experiment with other types of filaments, be sure your plate can handle it. PETG will stick too well to some plate coatings. Prusa has a good matrix to help.
Another vote for Jessie, I agree on premium prints at mid price
