As a foil: I grew up with an electric oven. Used an electric ofen through the 70s, 80s, 90s, 00s, and finally got a gas oven in 2017.
Because I was concerned about gas in the home, methane, CO, etc. I invested in a bunch of sensors so I’d know the moment any of it became an issue.
It’s been almost 9 years now, and I’ve yet to experience an issue.
However, that whole “you can use it when the power’s out” thing: can’t use the oven; the valve is electric. On my first gas range, the range wouldn’t even come on without electricity.
The pots and pans I use now are designed for gas and heat up fast, maintain an even heat, and cool down fast.
Essentially, I think not all devices are created equal.
I like not depending on a single utility for my energy needs, but at the same time wouldn’t shed a tear if methane production vanished tomorrow (I’d probably convert to propane short term and electric long-term).
I like not depending on a single utility for my energy needs
We had an extended outage in our neighborhood. Just over a week. I let the neighbors know I had enough wood and charcoal to keep the smoker at 275 all week and we could pop on the propane grills if we needed something hotter (I have been blessed with an abundance of backyard cookery). Fed half the neighborhood at some point that week, everyone at least got some ribs.
Last thing I want the folk on my street to do is go hungry, especially if all what’s wrong is the electricity.
Yes, actually. I can see the level go up slightly when the burners go on, but when the ventilation fan kicks in, the levels go back down almost immediately.
That’s what should actually be illegal. I see those everywhere now, and I can’t believe they were ever allowed. Mine is bad enough as a ceiling vent without hood but at least it does vent outside
What metrics did you monitor? With my air quality monitor I’d see CO2, particulate, nox skyrocket in rooms even far away from the gas stove. If you got a carbon monoxide detector + explosive gas detector then yeah you wouldn’t get any alarms with normal use, but those aren’t the only pollutants to monitor.
One unexpected change with induction is the handles of my cast iron skillets take much longer to get hot. If I cook something relatively fast, like an egg, I can now pick up the cast iron bare handed!
But if I wanted to cook during a power outage, I have a propane grill.
Actually, it’s kind of amusing that my main grill is a pellet grill with powered auger to feed the pellets, so I can’t use that in a power outage
As a foil: I grew up with an electric oven. Used an electric ofen through the 70s, 80s, 90s, 00s, and finally got a gas oven in 2017.
Because I was concerned about gas in the home, methane, CO, etc. I invested in a bunch of sensors so I’d know the moment any of it became an issue.
It’s been almost 9 years now, and I’ve yet to experience an issue.
However, that whole “you can use it when the power’s out” thing: can’t use the oven; the valve is electric. On my first gas range, the range wouldn’t even come on without electricity.
The pots and pans I use now are designed for gas and heat up fast, maintain an even heat, and cool down fast.
Essentially, I think not all devices are created equal.
I like not depending on a single utility for my energy needs, but at the same time wouldn’t shed a tear if methane production vanished tomorrow (I’d probably convert to propane short term and electric long-term).
We had an extended outage in our neighborhood. Just over a week. I let the neighbors know I had enough wood and charcoal to keep the smoker at 275 all week and we could pop on the propane grills if we needed something hotter (I have been blessed with an abundance of backyard cookery). Fed half the neighborhood at some point that week, everyone at least got some ribs.
Last thing I want the folk on my street to do is go hungry, especially if all what’s wrong is the electricity.
Did any of those sensors measure nitrogen dioxide?
Yes, actually. I can see the level go up slightly when the burners go on, but when the ventilation fan kicks in, the levels go back down almost immediately.
Yeah that’s why. Most people don’t have a real vent in their homes. It’s the recirculating one or nothing.
That’s what should actually be illegal. I see those everywhere now, and I can’t believe they were ever allowed. Mine is bad enough as a ceiling vent without hood but at least it does vent outside
What metrics did you monitor? With my air quality monitor I’d see CO2, particulate, nox skyrocket in rooms even far away from the gas stove. If you got a carbon monoxide detector + explosive gas detector then yeah you wouldn’t get any alarms with normal use, but those aren’t the only pollutants to monitor.
Co2, CO, particulates, NO2 and volatile organics.
I guess it’s down to venting?
One unexpected change with induction is the handles of my cast iron skillets take much longer to get hot. If I cook something relatively fast, like an egg, I can now pick up the cast iron bare handed!
But if I wanted to cook during a power outage, I have a propane grill.
Actually, it’s kind of amusing that my main grill is a pellet grill with powered auger to feed the pellets, so I can’t use that in a power outage