• chiliedogg@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    8 days ago

    My old 1985 LTD had to have its idle set at 25mph to keep from dying.

    When going through a school zone I had to ride the brake.

  • potoooooooo ☑️@lemmy.world
    link
    fedilink
    English
    arrow-up
    11
    ·
    9 days ago

    I revved mine because I don’t know how to drive a manual and had no business buying this 1980’s F-250 built like a Sherman.

    • empireOfLove2@lemmy.dbzer0.comOP
      link
      fedilink
      English
      arrow-up
      8
      ·
      edit-2
      9 days ago

      Funny you mention that because my other car is a 91 accord and it has that thermostat idle valve… About once a month in the winter I have to get under the hood and hit the stupid valve with a hammer to unstick it else it does the surging idle schtick when hot.

      • moonshadow@slrpnk.net
        link
        fedilink
        arrow-up
        7
        ·
        9 days ago

        My friend, have you considered cleaning the valve ~once every 10 years as opposed to beating it monthly? It’s not hard to do!

  • Omega_Jimes@lemmy.ca
    link
    fedilink
    arrow-up
    10
    ·
    9 days ago

    My friends Mustang would stall on speedbumps. Just speedbumps, no matter how fast or slow. We tried rebuilding the carb,and a bunch of other things, but we figured it’s probably more complicated than something we could fix in an afternoon, so anytime we went over a speedbump we’d throw it into neutral and get ready with the key.

    • boonhet@sopuli.xyz
      link
      fedilink
      arrow-up
      6
      ·
      8 days ago

      Chances are you’ve considered this, but does that car keep running if you disconnect the battery? I know some older cars do, but if the 'stang doesn’t, perhaps it’s a loose battery terminal. I’ve seen that before.

    • RagingRobot@lemmy.world
      link
      fedilink
      arrow-up
      8
      arrow-down
      3
      ·
      9 days ago

      I wish I could still make a cool sound with my ev they should add a button that revs the space ship sound up

      • baldingpudenda@lemmy.world
        link
        fedilink
        arrow-up
        7
        ·
        9 days ago

        I can’t remember who, maybe audi or Lexus, but they are engineering their electric engines to make a pleasant base noise instead of the regular spaceship noises.

            • boonhet@sopuli.xyz
              link
              fedilink
              arrow-up
              3
              ·
              8 days ago

              I hated the Ford Mustang Mach-E for not simply being the Ford Mach-E (since it’s an electric crossover, not even an electric sports or muscle car), but the Charger’s such a brilliant name for an EV, I don’t even mind. And at least they didn’t make it a crossover. Still wouldn’t buy one because lol Stellantis product, hell no

      • WanderingThoughts@europe.pub
        link
        fedilink
        arrow-up
        15
        ·
        9 days ago

        There are sets for that so your EV can produce all kinds of sounds, revving the engine like a V8, laugh like a witch, … It’s a bit silly that manufacturers start asking subscriptions for heated seats, while people would put real money down for skins for their dash and custom engine sounds.

            • boonhet@sopuli.xyz
              link
              fedilink
              arrow-up
              1
              ·
              8 days ago

              Ooh, what Land Rover? Those nasty leaky finnicky things look so awesome to me, I’m so tempted to get an L322 or a Disco 4. Preferably the L322 because V8 diesel, baby!

              • JustARegularNerd@lemmy.dbzer0.com
                link
                fedilink
                arrow-up
                2
                ·
                8 days ago

                I was joking unfortunately, I don’t have a Land Rover. However a close relative of mine has a Discovery 2 (2.8L i5 Diesel, TD5 engine) and sure, it’s a damn solid and capable vehicle, when it’s running.

                My god, doing any work on it requires custom tools (that relative fabricated his own spanner tool to hold the radiator fan while undoing its locking nut), a custom aftermarket computer to do basic functions you’d typically do via OBD (talking about the proprietary Nanocom, car isn’t compatible with OBD2) and extra effort for the odd engineering choices made (coolant system runs through the oil system, separating some part of the motor to service this immediately mixes your oil and coolant).

                When that relative bought it I was pretty onboard with getting a Land Rover, maybe a Freelander or Discovery 1, but after his experiences I’d never touch one. No thank you, I will stick to my small Japanese cars.

                • boonhet@sopuli.xyz
                  link
                  fedilink
                  arrow-up
                  1
                  ·
                  edit-2
                  8 days ago

                  Ah I think the newer ones are slightly better in that they have OBD2 and there’s an affordable aftermarket solution that gives near-dealership level capabilities… But the downside is all the electronics. But then another upside is that they get ZF transmissions which are widely used so easy to acquire maintenance and repair knowledge on. And the engines apparently aren’t TOO bad when it comes to the V8s. The V6 diesels have a worse rep, as does everything in the Ingenium family which… let’s just say plenty of people have brand new engines courtesy of JLR! Ironically they’re back to their most reliable engine being a BMW one, and now it’s the BMW V8 lol

                  If you’re into cars, you may find the YouTube channel LR Time, which is made by a lovely German couple that maintains and repairs their Land Rovers together.

                  Personally my current idea is to have a reliable daily driver (currently thinking of Lexus GS, the S190 generation with a V6 with no hybrid system in particular) and then a Land Rover that it’s OK if it’s down for a couple of weeks or even months because I can just drive the other car. I do my own repairs, so I’ve maintained plenty of cars that people would think to be money pits, without going bankrupt on account of any of them.

                  Want to get rid of my Audi, it leaks oil somewhere between the engine and transmission and I ain’t taking that transmission out, fuck that. It’d go something like “oh while I’m in here, let’s replace the chain tensioners and guides” and “oh, let’s also replace these gaskets” and “hmm well the starter is pretty old and access is good right now, let’s replace that too” and then “oh look, it’s been 2 months and 2000€ worth of parts since I picked it apart and it’s my only god damn car” lol

  • atomicbocks@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    5
    ·
    9 days ago

    Assuming you have already done normal maintenance (and this meme is based on any form of reality), the first thing I would check is the air intake at the throttle. It gums up at the opening and not enough air can get through at idle.

  • Ephera@lemmy.ml
    link
    fedilink
    English
    arrow-up
    2
    ·
    9 days ago

    Man, I keep having that problem, that some car or motorcycle sounds like it needs a repair to me, only for me to realize that, no-no, they want it to sound like that.

    Just yesterday evening, I heard someone revving before accelerating again after a stop at a crossing, and if they would’ve gotten out of their car at that point, I might’ve shouted over that, damn, sounds like they need to get their clutch looked at.
    Genuinely thought they failed to engage a gear multiple times. Meanwhile, they would’ve probably punched my face in, if I insulted their car like that. 🙃

    • Alcoholicorn@mander.xyz
      link
      fedilink
      arrow-up
      2
      ·
      8 days ago

      Replacing the cat and muffler with a straight pipe make it go faster! Giving everyone around you hearing damage and lung cancer is worth going 1% faster in a Honda Civic.

  • ramble81@lemmy.zip
    link
    fedilink
    arrow-up
    7
    ·
    9 days ago

    I had a late 80s Plymouth that I had to keep my foot slightly on the throttle and revving about 1000rpm because if it dipped to idle speed (around 600rpm) it’d just crap out. So I’m sitting at the light with my foot on the brake and feathering the accelerator.